|
|
|
 |
 |
LUMINART SYSTEM 2000
MODEL
[ Multi-System 4000
] [ Multi-System 2000
] [ Overview ] [
Request Brochure ]
The Luminart System 2000 is ideal for smaller shops producing Luminite signs .. or for shops with limited space .. It enjoys all the capabilities of the System 4000 - yet is less expensive, easily portable - and can even sit on a desk.
The Luminart System 2000 - with its milled aluminum surface, encourages precise production - creating signs up to 2 ft. by 10 ft. For those specializing in custom sign work, this is for you. A portable curing chamber is an optional feature.
LUMINART SYSTEM 2000 HIGHLIGHTS:
- The world's first computer-automated Luminite applicator.
- Luminite dispensing head.
- Variable Viny;-cutting tool with weights.
|
- Pen-plotter.
- Vacuum hold-down system.
- Luminart interface software.
|
SYSTEM 2000 - TECHNICAL DATA
TABLE
| Length/Width/Height: |
42"/30"/3" to table top |
1066.8mm/762mm/76.2mm |
| Weight: |
110 lbs |
50 kg (approx.) |
WORKING RANGES
| Maximum Working Ranges: |
X (Travel): 27" Y (Gravity): 25" |
686 mm 635 mm |
| Max. Gantry Clearance Height: |
Up to 2.3" |
Up to 58 mm |
| Material Width: |
Up to 30" |
Up to 762 mm |
SPEED
| Plotting/Cutting Speed: |
Up to 4.5/ips |
Up to 114 mm/sec. |
| Dispensing Speed: |
Up to 1.6/isp |
Up to 41 mm/sec. |
| Routing Speed: |
Up to 1.6/isp |
Up to 41 mm/sec |
PRECISION
| Positioning Resolution: |
Up to 0.01" |
Up to 0.25 mm |
| Addressable Resolution: |
Up to 0.01" |
Up to 0.25 mm |
| Repeatability: |
Up to 0.005" |
Up to 0.13 mm |
CURING CHAMBER
| # of Light Bulbs: |
18 on top/ 18 on bottom/ F40BL Flourescent bulbs |
TRANSPORT SYSTEM
| X-Drive System: |
Dual guidance rails and positioning belts on both sides of the table
driven by a single, gantry-mounted stepper motor. |
| Y-Drive System: |
Dual guidance rails with single, dynamic positioning belt driven by a
single gantry mounted stepper motor. |
| Z-Drive System: |
Dual guidance rails with an anti-backlash ball-screw driven by an
adjustable-height stepper motor. |
SOFTWARE
| HPGL Commands: |
Lumindraw - interfaces with HPGL file formats |
ELECTRONICS
MAIN CONNECTIONS
| Adjustable Supply Voltage: |
220V/50 cycle, 220V/60 cycle, 110V/60 cycle |
| Vacuum Pump: |
120 Volt 7.5 Amp, 220 Volt 3.8 Amp |
| Power Frequency: |
60 Hz, 50 Hz |
| Power Consumption: |
Controller Power Supply - 1000 watts |
CURING CHAMBER - TECHNICAL DATA
| Overall Size: |
12-1/2"H x 27"L x 12"W |
32 cm x 69 cm x 62 cm |
| Curing Area: |
24-1/2" x 23-1/2" (larger if flap is opened) |
62 cm x 60 cm (larger if flap is opened) |
| Voltages: |
120V @ 60Hz, 220V @ 50Hz |
|
| Light Bulbs: |
12 BL flourescent bulbs 20 watt, 24" |
12 BL flourescent bulbs 20 watt, 61 cm |
| Weight: |
130 lbs |
59 kg |
|
|
|
