LUMINART SYSTEM 4000

MODEL [ Multi-System 4000 ] [ Multi-System 2000 ] [ Overview ]

The Luminart System 4000 is all about creativity and productivity -- and Profitability. Yes, Profitability - because System 4000's unprecedented potential for the production of Luminite Signs and other unique Luminite promotional and decoratyive products means it's a business-building center.

The high-strength aircraft grade aluminumn and honeycomb structure of Luminart's System 4000 keeps everry inch of the sign's surface flat and provides precise production.



LUMINART SYSTEM 4000 HIGHLIGHTS:
  • The world's first computer-automated Luminite applicator.
  • Luminite dispensing head.
  • Variable Vinyl-cutting tool with weights.
  • Pen-plotter.
  • Built in curing chamber
  • Vacuum hold-down system.
  • Luminart interface software.
SYSTEM 4000 - TECHNICAL DATA

TABLE

Length/Width/Height: 66"/55.5"/47.5" to table top 1678mm/1410mm/1027mm
Weight: 551 lbs 250 kg (approx.)

WORKING RANGES

Maximum Working Ranges: X (Travel): 58"

Y (Gravity): 51"

 1480 mm

1295 mm
Max. Gantry Clearance Height: 2.3" 58 mm
Material Width: 58" 1480 mm

SPEED

Plotting/Cutting Speed: Up to 4.5/ips Up to 114 mm/sec.
Dispensing Speed: Up to 1.6/isp Up to 41 mm/sec.
Routing Speed: Up to 1.6/isp Up to 41 mm/sec

PRECISION

Positioning Resolution: Up to 0.01" Up to 0.25 mm
Addressable Resolution: Up to 0.01" Up to 0.25 mm
Repeatability: Up to 0.005" Up to 0.13 mm

CURING CHAMBER

# of Light Bulbs: 18 on top/ 18 on bottom/ F40BL Flourescent bulbs

CURING TRAY

Curing Chamber Tray: OP4-UVT (ultraviolet transmitting)
Size of Tray: 50" x 50" 1270 mm x 1270 mm

TRANSPORT SYSTEM

X-Drive System: Dual guidance rails and positioning belts on both sides of the table driven by a single, gantry-mounted stepper motor.
Y-Drive System: Dual guidance rails with single, dynamic positioning belt driven by a single gantry mounted stepper motor.
Z-Drive System: Dual guidance rails with an anti-backlash ball-screw driven by an adjustable-height stepper motor.

SOFTWARE

HPGL Commands: Lumindraw - interfaces with  HPGL file formats

ELECTRONICS

3-Axis Control: X, Y & Z

MAIN CONNECTIONS

Adjustable Supply Voltage: 220V/50 cycle, 220V/60 cycle, 110V/60 cycle
Vacuum Pump: 120 Volt 7.5 Amp, 220 Volt 3.8 Amp
Power Frequency: 60 Hz, 50 Hz
Power Consumption: Controller Power Supply - 1000 watts